Hama Piko Bedienungsanleitung Seite 6

When you have chosen the command Speed up my system, the
following property window appears.
Please select the command Use this device in the tab ReadyBoost in
order to activate the ReadyBoost function.
With the sliding regulator you determine now how much memory you
want to use for the ReadyBoost function.
The system reserves the selected capacity as ReadyBoost.sfcache;
the FlashPen can only be used as mass storage medium again if
ReadyBoost is deactivated for the stick.
Select the command Do not use this device if you do not want to use
the ReadyBoost function. Your Hama FlashPen »Piko« can now be
used as mass storage medium.
Note:
Hama recommends the following points for the ReadyBoost function
• Memory capacity over 256MB (the cache fi le can
be generated by the ReadyBoost function from
235 MB to max. 4GB)
• USB 2.0 connection
• Min. writing/reading speed
Random Read (4KB block) > 3 MB /sec.
Random Write (512KB block) > 2 MB / sec.
• With min. 64MB free memory
Only one fl ash memory device per computer/
notebook can be used for the ReadyBoost function.
5