Peltor ComTac XS MT15H69FB Bedienungsanleitung Seite 11

ear cushion is damaged, it must be replaced; see the CARE section.
HY100A Clean single-use protectors
A single-use protector that is easy to apply to the ear cushions. Packages of
100 pairs. Installing single-use protectors can affect the hearing protector's
acoustic properties.
M60/2 Wind protector for level dependent microphones
Effective against wind noise. One pair per package.
1077 SV Battery cover
Receive-Only Audio Input cables.
FL6H 3.5-mm mono plug
FL6M 2.5-mm mono plug
FL6N 3.5-mm stereo plug for Micman com radio
Y-cables
FL6AC Wired as fig. G:1
FL6AF Wired as fig. G:2
Headset versions with hardwired downlead
MT15H69FB-38
MT15H69FB-47
MT7-FL6AB Headset kit (F:1)
Product models with no microphones can be converted into headsets by the
addition of a boom microphone on one of the guide wires or a throat microphone
(MT9). The microphone connects to the audio input via a Y cord and then to an
external radio. Wired as fig. G:1
FL5000 Peltor FL5000 adapter series (F:2)
Adapters that give optimum adaptation of Peltor headsets to most communication
radio models on the market. Only available for headsets wired as (G:1).
The adapter has a functional, watertight, sturdy casing with no protruding parts.
The size is designed to fit easily in the hand, but it is also easy to attach to the
clothing so that it isn't in the way and doesn't risk snagging on anything.
* Some models have an external switch between the headset and the radio.
Boom microphones
MT70-05 fig. (H:2)
MT21 fig. (H:1)
Wired as fig. G:1
Wired as fig. G:2
9