Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Before first Use
Remove the protection film from the flat blade and clean all parts of the salad +
multi grater set.
Using
1. Place the bowl on a level surface.
2. Wash the salad as usual and insert the lettuce leaves into the basket. Close
the bowl with the lid and turn the crank several times in clockwise direction.
To stop spinning, press the hold button once.
Using the Multi Grater Set
1. Place the bowl on a level surface. Select a blade and insert
the blade in the grater body. Press the blade as far as it will
go until it locks.
2. Insert the fruit or vegetable into the food holder. Insert the
pusher with the spiky side into the food so the spiky pins can
firmly hold the food.
Before you insert fruit or vegetables into the food holder, cut them in suitable
sizes. For cutting/chopping larger food, remove the food holder from the
grater body. Make sure not to touch the blade with your fingers while cutting.
3. Slide the food evenly and with less pressure through the blade.
Cleaning and Storing
Before first use, clean all parts in warm soapy water and rinse all parts
thoroughly. Dry all parts well before using. Do not use aggressive chemicals
or abrasives in order not to damage the surfaces.
To store the blades space savingly, place the shredder and
the wavy blade into the suitable notches on the side of the
grater body. Store the flat blade in the grater body.
When cutting salty and acid food, clean the multi grater
and the blades immediately. When chopping onions and
garlic, rinse all parts immediately after use.
When cutting fading food, the plastic parts of the set may
become discoloured. Clean these parts immediately with
detergent.
Using
V
Werbung
