Camera Positioning - Alecto DVC-155IP Bedienungsanleitung

3.

CAMERA POSITIONING.

The camera may be placed on any horizontal surface. You may also mount the
camera to a wall using the supplied wall bracket.
Attention: Make sure the camera is already registered to the Wi-Fi network.
When the camera is installed and then connected to the mains, it'll re-establish
the connection with the network. Please first check whether a proper connection
can be established with your Wi-Fi router.
4 RESET.
When contact with the camera is no longer possible and you can no longer
determine what the IP address or the port number no longer corresponds, you
can externally reset the camera to restore the default factory settings.
At the rear of the camera you'll find a small hole marked 'reset'. Use a pointy
object such as a paperclip to press the button inside this hole.
Press this button while the camera is starting up and keep it depressed for at
least 10 seconds.
The camera can now only be reached via Wi-Fi Direct. Now follow the
registration process, see 2.3.