Herunterladen Inhalt Inhalt Diese Seite drucken

General Safety Rules - Ryobi RP4020 Bedienungsanleitung

Tek4 digitalmultimeter
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 23
GB
FR
DE
ES

GENERAL SAFETY RULES

WARNING
Read all instructions. To reduce the risk of
injury, user must read instruction manual. Failure
to follow all instructions listed below may result in
electric shock, fire and/or serious injury.
SAVE THESE INSTRUCTIONS.
Q
Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
Avoid body contact with earthed or grounded
Q
surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
Do not expose battery products to rain or wet
Q
conditions. Water entering a battery product will
increase the risk of electric shock.
Do not abuse the leads. Never use the leads for
Q
carrying or pulling the battery product. Keep
leads away from heat, oil, sharp edges or moving
parts. Damaged or entangled leads increase the risk
of electric shock.
Do not abuse the accessory cord. Stay alert,
Q
watch what you are doing and use common sense
when operating a battery product. Do not use
a battery product while you are tired or under
the influence of drugs, alcohol or medication.
A moment of inattention while operating battery
products may result in serious personal injury.
Do not overreach. Keep proper footing and
Q
balance at all times. Do not use on a ladder or
unstable support. Stable footing on a solid surface
enables better control of the battery product in
unexpected situations.
Maintain this product. Check breakage of parts
Q
and any other condition that may affect the
product's operation. If damaged, have the product
repaired before use. Many accidents are caused by
poorly maintained products.
Dress properly. Do not wear loose clothing or
Q
jewelry. Keep your hair, clothing and gloves away
from leads or moving parts. Loose clothes, jewelry
or long hair can be caught in moving parts.
Wear rubber-bottomed shoes or sneakers when
Q
working with high-voltage equipment. Make sure
that the controls applied will prevent operation of the
equipment and that all hazardous energy, including
residual or stored energy, is blocked, discharged, or
relieved prior to starting work.
If you need to probe or otherwise touch circuits
Q
with power off, discharge (across) large power
IT
NL
PT
DK
SE
FI
NO
RU
PL
CZ
English
supply filter capacitors (at least 2 times). Monitor
while discharging and/or verify that there is no
residual charge using the multimeter.
If you must probe live, put electrical tape over all
Q
but the last 1/16 in. of the test probes to avoid the
possibility of an accidental short, which could
cause damage to various components. Clip the
reference end of the meter or scope to the appropriate
ground return so that you need to only probe with one
hand.
Never enter alone into an area containing exposed
Q
electrical energy sources.
Use only the test instruments and insulated tools
Q
rated for the voltage and current specified.
Store idle battery products out of the reach of
Q
children and do not allow persons unfamiliar
with the battery product or these instructions to
operate the product. Battery products are dangerous
in the hands of untrained users.
Maintain battery products. Check for misalignment
Q
or binding of moving parts, breakage of parts and
any other condition that may affect the product's
operation. If damaged, have the product repaired
before use. Many accidents are caused by poorly
maintained products.
Use the product and accessories in accordance
Q
with these instructions and in the manner
intended for the particular type of product,
taking into account the working conditions and
the work to be performed. Use of the product for
operations different from those intended could result
in a hazardous situation.
BATTERY PRODUCT USE AND CARE
Q
Ensure the switch is in the OFF position before
inserting battery pack. Inserting the battery pack into
products that have the switch on invites accidents.
Recharge only with the charger specified by the
Q
manufacturer. A charger that is suitable for one type
of battery pack may create a risk of fire when used
with another battery pack.
Use battery products only with specifically
Q
designated battery packs. Use of any other battery
packs may create a risk of injury and fire.
When battery pack is not in use, keep it away
Q
from other metal objects like paper clips, coins,
keys, nails, screws, or other small metal objects
that can make a connection from one terminal to
another. Shorting the battery terminals together may
cause burns or a fire.
1
HU
RO
LV
LT
EE
HR
SI
SK
GR
TR

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis