Herunterladen Diese Seite drucken
Siemens SITOP smart 48V/10A Betriebsanleitung
Siemens SITOP smart 48V/10A Betriebsanleitung

Siemens SITOP smart 48V/10A Betriebsanleitung

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 3
SITOP smart 48V/10A
6EP1 456-2BA00
Betriebsanleitung
Best.-Nr.: C98130-A7583-A1-2-6419
Operating instructions
Instructions
Istruzioni di servizio
Instrucciones
SIEMENS AG ÖSTERREICH, 03.2007
1/8
SITOP smart 48V/10A

Werbung

loading

Inhaltszusammenfassung für Siemens SITOP smart 48V/10A

  • Seite 1 SITOP smart 48V/10A 6EP1 456-2BA00 Betriebsanleitung Best.-Nr.: C98130-A7583-A1-2-6419 Operating instructions Instructions Istruzioni di servizio Instrucciones SIEMENS AG ÖSTERREICH, 03.2007 SITOP smart 48V/10A...
  • Seite 2 Ai fini della chiarezza le presenti istruzioni di servizio non contengono tutte le informazioni dettagliate su tutti i tipi del prodotto e non possono nemmeno trattare tutti i casi di installazione, di esercizio o di manutenzione. Per ulteriori informazioni rivolgersi alla filiale Siemens di zona o consultare la homepage http://www.siemens.com/sitop.
  • Seite 3 Eingangsspannung 3AC 400-500 V 0,2… 4 mm Schraubklemmen; Verwenden Sie einen Schraubendreher mit 4 mm Klingenbreite. Schutzleiter Empfohlenes Anzugsmoment: 1,2 Nm +, – Ausgangsspannung DC 48 V 13, 14 Potenzialfreier Relaiskontakt (Schließer) für Ausgangsspannung >38 V SIEMENS AG ÖSTERREICH, 03.2007 SITOP smart 48V/10A...
  • Seite 4 AWG 24 to 10 4 mm. Protective earth conductor Recommended tightening torque 1.2 Nm. +, – Output voltage DC 48 V 13, 14 Floating relay contact (make contact) for output voltage V >38 V. SIEMENS AG ÖSTERREICH, 03.2007 SITOP smart 48V/10A...
  • Seite 5 Conducteur de protection Couple de serrage recommandé 1,2 Nm +, – Tension de sortie 48 V cc 13, 14 Contact de relais libre de potentiel (NO): tension de sortie U >38 V SIEMENS AG ÖSTERREICH, 03.2007 SITOP smart 48V/10A...
  • Seite 6 Conduttore di protezione Coppia di serraggio consigliata 1,2 Nm +, – Tensione di uscita DC 24 V 13, 14 Contatto di relè a potenziale libero (di lavoro): tensione di uscita U >38 V SIEMENS AG ÖSTERREICH, 03.2007 SITOP smart 48V/10A...
  • Seite 7 Conductor de protección Par de apriete recomendado 1,2 Nm +, – Tensión de salida 48 V DC 13, 14 Contacto de relé aislado galvánico (contacto NA): tensión de salida U >38 V SIEMENS AG ÖSTERREICH, 03.2007 SITOP smart 48V/10A...
  • Seite 8 Herausgegeben von SIMEA © Siemens AG Österreich All rights reserved. Bereich A&D Siemensstraße 88-92 A 1210 Wien Liefermöglichkeiten und technische Änderungen vorbehalten Siemens AG Österreich Best.-Nr.: C98130-A7583-A1-2-6419 Printed in Austria Stand 03.2007...