Using Your Induction Hob - Kenwood IH470 series Bedienungsanleitungen

key
A hob plate
B pan guide
C control knob
D on/standby button
E menu/set button
F menu/time increase button
G LED display
H menu/time decrease button
I time button
J
turbo button
using your induction
hob
Note : the buttons on the hob are
temperature-touch sensitive; they are
operated by placing the pad of the
finger
on them. Do not tap with finger nail.
1 Plug in the induction hob. The
appliance will beep once, the LED
display flashes and shows "L".
The appliance is now in standby
mode.
2 Press the on/standby button D,
the on/standby indicator light will
flash and the fan is on. The
appliance is now in standby ready
for heating.
3 Place the pan centrally onto the
induction hob, within the pan guide
shown by the graphic on the hob
plate B.
Note : the power level or
temperature and the cooking time
can be adjusted using either the
control knob C or the increase /
decrease ( + / - ) buttons F and H.
To use the control knob, push it in
until it clicks and then release C.
It can then be turned clockwise to
increase or anticlockwise to
decrease.
If the hob is turned on but no pot
is placed on it, the hob will
change to standby ready for
heating after 1 minute.
If no menu is set/selected the hob
will change to standby mode after
10 seconds.
4 Select the desired menu setting
with the menu / set button E
Power - press 'menu/set' once
and the default power level of
1600 watts is selected, the display
shows '1600' and the power
indicator light is on.
The normal power range is from
120w to 2000w in the following
steps :
120w - 400w - 500w - 800w -
1000w - 1200w - 1400w - 1600w
- 1800w - 2000w
Increase or decrease to the
desired power.
Cooking will start. If no other
button is pressed, cooking will
continue for 2 hours and will then
automatically change to standby
mode.
Temperature - press 'menu/set'
twice and the default temperature
of 140°C is selected, the display
shows '140' and the temp.
indicator light is on. The
temperature range is 60°C to
240°C in steps of 20°C; increase
or decrease to the desired
temperature. Cooking will start. If
no other button is pressed, cooking
will continue for 2 hours and will
then automatically change to
standby mode.
Keep warm - press 'menu/set'
three times and the induction hob
will be at keep warm setting and the
keep warm indicator light is on.
Keep warm is at around 60°C ; the
display is " ----". If no other button
is pressed, the hob will stay at keep
warm for 2 hours and then
automatically change to standby
mode.
5 Cooking time.
The hob can be set to cook for a
fixed time. After selecting the menu
as above, press the "time" button;
the display will flash "0:00" four
times and the time indicator light will
be on. Turn the control knob or
press the + / - buttons to select
the desired cooking time. Holding
the finger on the buttons will
increase / decrease the time in
6