Angle Cut Setting - Westfalia 49 86 26 Bedienungsanleitung

Assembling and Using
Do not place the workpiece loosely on the mitre saw but fix it with the
provided fasteners. Do not force the saw while cutting. This leads to deviation
and can break the saw blade.
Make sure the saw blade is tensioned sufficiently to avoid „whipping" of the
blade. Otherwise the blade will deviate from a true cut. To tension the saw
blade, use the wing screw on the saw blade assy (1). Release the tension of
the blade after each use.
Make sure the blade is in line and central to the saw frame.

Angle Cut Setting

30°
45°
22,5° 36°
15°
90°
10