Operation Instruction - welldana 34-180150 Installations- Und Benutzerhandbuch

VI. Operation instruction
Picture for keys
Note:
① You may set the desired water temperature from 18 to 35℃.
② The
on the right shows the inlet water temperature. The
left shows the set temperature by pressing
③ After you turn on the heat pump, the fan will start to run in 3 minutes. In
another 30 seconds, the compressor will start to run.
④ During heating, the
2.2.1. Mode selections
①
will be light as standard when you turn on the heat pump.
② Press the
light.
Press the
2.2.2. Compulsory defrosting
① When the heat pump is heating and the compressor is working
continuously for 10 minutes, press both "
seconds to start compulsory defrosting. (Note: the interval between
will be light.
button to enter the Silence mode, the
button again to exit and enter the SMART mode.
" and "
9
or button.
" buttons for 5
on the
will be