welldana 34-180150 Installations- Und Benutzerhandbuch Seite 58

heat pump must be connected with hard pipes!
2) In order to guarantee the heating efficiency, the water pipe length should be
≤10m between the pool and the heat pump.
B. Installation instruction
1) Location and size
The heat pump should be installed in a place with good ventilation
* Minimum distance
filter
water processor
water switch
2) The frame must be fixed by bolts (M10) to concrete foundation or brackets.
The concrete foundation must be solid and fastened; the bracket must be strong
enough antirust treated;
3) Please don't stack substances that will block air flow near inlet or outlet
area, and there is no barrier within 50cm behind the main machine, or the
7