Trebs 99360 Bedienungsanleitung Seite 18

USING INSTRUCTIONS
IMPORTANT: allow several minutes for the pad to preheat. If there is
a red blinking "HIgh" light, this means an error has occurred. Unplug
the pad from the outlet and inspect the condition of the cord and the
function of your main outlet. If blinking continues, stop using the pad
and contact the Trebs customer service.
Plug the heat and massage pad into a
220V-240V outlet.
Place the pad on your body as shown on
the picture so it will fit your body
perfectly and fasten it with the clip
closure.
Turn on the switch of the controller's
backside and then select the desired heat
or massage function on the front of the
controller. IMPORTANT: if the heat
indicators do not light up or stay on,
unplug from the electrical outlet.
18