AUDIOropa xepton TRX-1 Bedienungsanleitung Seite 25

2.10 Power supply / recharge
The device has an installed rechargeable lithi-
um-ion battery of 3,7 V / 1100 mAh.
To charge the battery, plug the USB charging
cable into the USB jack of the TRX-1 and
connect it to a regular USB port (computer,
laptop, USB power supply).
The charging status LED blinks during rechar-
ge. The LED switches off when the battery is
fully loaded.
To charge multiple devices, we recommend using
the 10-bay charging case »MCB-10« (Accessory,
item no. A-5252-0).
2.11 Specificaions xepton TRX-1
Device type
Dimensions
Weight
Frequency type
Transmission mode ISM 2.4 GHz FSK modula-
Transmission power Maximum 10 mW
Voice codec
RX-sensitivity
Latency
Data rate
Frequency bandwidth 2 MHz
Transmitter/receiver
98 x 49 x 17 mm (H x W x D)
88 g
ISM 2403 - 2480 MHz
tion with frequency hopping
16bit / 16 KHz
-95 dBm
< 35 ms
2 Mbps
English 25