Product Features; Technical Data; Noise/Vibration Information - GreenWorks Tools 3200007 Bedienungsanleitung

EN
DE ES IT FR PT NL RU FI SV NO DA PL CS SK SL HR HU RO BG EL AR TR HE LT LV ET

PRODUCT FEATURES

The numbering of the product features refers to the
illustration of the machine on the graphics page.
1 On/Off switch
2 Spindle lock button
3 Direction-of-rotation arrow on housing
4 Protection guard for grinding
5 Locking screw for protection guard
6 Grinder spindle
7 Disc Flange
8 Grinding wheel
9 Clamping nut
10 Guard clasp
11 Auxiliary handle
12 Battery pack*
13 Battery unlocking button*
14 Wrench
*Accessories shown or described are not part of the
standard delivery scope of the product. A complete
overview of accessories can be found in our accessories
program.

TECHNICAL DATA

Product name 24V Angle Grinder
Rated voltage 24V
No-load speed 7000rpm
Shaft 14 mm
disc diameter 115 mm
Weight (without
1.6 kg
battery and charger)
Battery 29807 / 29837
29817 (VDE) / 29827(BS) /
Charger
2913907 ((VDE&BS)
Sound power level LwA=91.7dB(A), K=3
Sound pressure
LpA=80.7dB(A), K=3
level
Vibration level 9.079m/s

NOISE/VIBRATION INFORMATION

Sound emission values determined according to EN
60745-2-3.
Typically the A-weighted sound pressure level of the
product is 80.7 dB(A). Uncertainty K=3 dB.
The noise level when working can exceed 80 dB(A).
Wear hearing protection!
Vibration total values ah (triax vector sum) and uncertainty
K determined according to EN 60745-2-3: ah=9.079m/s
English (Original Instructions)
2
, K=1.5
2
,
2
K=1.5m/s .
The vibration level given in this information sheet has
been measured in accordance with a standardised test
given in EN 60745 and may be used to compare one tool
with another.
It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the
main applications of the tool. However if the tool is used
for different applications, with different accessories or
insertion tools or is poorly maintained, the vibration
emission may differ. This may significantly increase the
exposure level over the total working period.
An estimation of the level of exposure to vibration should
also take into account the times when the tool is switched
off or when it is running but not actually doing the job.
This may significantly reduce the exposure level over the
total working period. Identify additional safety measures
to protect the operator from the effects of vibration such
as: maintain the tool and the accessories, keep the hands
warm, organisation of work patterns.
KNOW YOUR ANGLE GRINDER
The safe use of this product requires an understanding
of the information on the product and in this operator's
manual as well as a knowledge of the project you are
attempting. Before use of this product, familiarize yourself
with all operating features and safety rules.
Side Handle
The side handle can be installed on the left or right side
of the grinder for stabilization and must be used during all
operations.
Spindle Lock
The spindle lock secures the spindle so that only one
wrench is needed to change the grinding wheel.
Toolless Guard
A toolless guard deflects sparks and metal chips during
use.
ASSEMBLY
Unpacking
This product requires assembly.
■ Carefully remove the tool and any accessories from
the box. Make sure that all items listed in the packing
list are included.
Do not use this product if any parts on the Packing
List are already assembled to your product when you
unpack it. Parts on this list are not assembled to the
product by the manufacturer and require customer
installation. Use of a product that may have been
improperly assembled could result in serious personal
injury.
2
WARNING