Controls - Stihl FW 20 Gebrauchsanleitung

Mounting the limit stop
Position limit stop (1) on cut-off
N
machine cart – the holes must line
up
2
3
Screw in and tighten bolts (2) with
N
washer (3) on
FW 20

Controls

Cutting depth adjustment
The cutting depth adjustment is
N
actuated via the lever (1)
Lever position
A Depth limiter unlocked
B Depth limiter locked
Position A – unlocking
A
For setting the required cutting depth
and entering the cut.
Position B – locking
For fixing the set cutting depth and
working with a uniform cutting depth.
Release with combination wrench
If the cutting depth adjustment cannot be
released via the lever on the guide tube,
it can still be released with the
combination wrench.
WARNING
Always switch off the engine before
unlocking with a combination wrench –
do not touch the hot muffler.
A
Insert the combination wrench (2) in
N
the hole (3) and press down in the
direction of the arrow
English
B
B
13