Raptor 051711 Benutzerhandbuch Seite 13

CH (Chronograph):
A quick, short press of CAL turns the chronograph on and off. To clear the
chronographic data, use a 3 second press of the M button.
ATL (Altimeter Log):
A quick, short press of the or buttons allows review of the stored
altimeter data. The memory number is in the circle to the left of ATL in the
display. As you press this, you'll see the memory numbers 1-10 at the top
right corner. The log data is shown in the display's center and lower section.
MEMORY
T1
M
MONTH DAY YEAR
AL (Alarm):
Use a 3 second press of the M button to select alarm 1 or alarm 2. Use a 3
second press of CAL to get the hour to blink. Set the hour with the or but-
tons. A quick, short press of M makes the minutes blink. Set the minutes with the
or buttons. A quick, short press of CAL exits the alarm setting mode.
Activate alarm 1 or 2 with a quick, short press of MEM. Go back and forth
between alarm 1 and 2 with a 3 second press of M.
The beeping of alarm 1 and 2 are different.
11