Printronix SL5000r Kurzanleitung Seite 8

Loading Media And Ribbon
1
Pivoting
Deck
IMPORTANT
8
Loading Roll Media
If you are using direct thermal mode, clean the printhead,
platen roller, and upper and lower media sensors every time
you change the media.
1. Slide the media hanger guide outward to the end of the media
hanger, and flip it up into the horizontal position (as shown).
2. Open the pivoting deck by rotating the deck lock lever fully
clockwise.
Media Hanger
Media Hanger
Guide
Deck Lock
Lever