dBTechnologies RDA 800 W Bedienungsanleitung Seite 10

ENGLISH
RDA800W
2.2 Use in combination with in ear monitors
Connect the supplied cable to the BNC connector in the rear of the antenna. The other side must
be fitted in the transmitter's connector (Fig. 6).
The antenna must be oriented for covering the whole professional's range of action. Always adjust
the antenna height until the receiver is "in sight".
In case wireless microphones are in use at the same time, care must be taken in order to place the
receivers' antennas in the back of directive antenna. In this way, thanks to the optimum rejection of
the antenna on this side, the in ear monitor's transmitter does not interfere with the wireless
microphones and it's possible to increase the amount of wireless systems that can operate
simultaneously. (Fig.7)
The antenna amplifier (AA800) is recommended for long antenna
cables to avoid wastes.
The gain is between 5 and 20dB. (Fig. 8)
9