Bimar INFRA quarz S213.EU Bedienungsanleitung Seite 13

damaged and switch it on after these controls: in case of
doubt, contact professionally qualified persons.
 WARNING: this heater is not equipped with a device to
control the room temperature. Do not use this heater in
small rooms when they are occupied by person not
capable of leaving the room on their own, unless constant
supervision is provided.
 Do not use this heater the immediate surroundings of a
bath, a shower or a swimming pool.
 The heater must not be located immediately below a
socket-oulet.
 Do not pull on the power cord or the appliance to unplug
the appliance from the electric socket.
 If the electric cord is damaged, it has to be replaced by the
supplier or an authorized service center or a professionally
qualified, to avoid any risks.
 Do not use the appliance with a timer or a programmer or with
a system that can switch on the appliance automatically, to
avoid risk of fire, since a fire risk exists if the heater is covered or
positioned incorrectly.
 ATTENTION: The heater must not be used if the candle are
damaged.
INSTALLATION
 After removing the packing materials, check the integrity of the appliance; if you
are unsure, do not use it and ask for qualified professional help. The packing
materials (plastic bags, polystyrene foam, nails, etc.) must be kept out the reach of
children because they are potential sources of danger; but dispose of them in
accordance with current law.
 Before connecting the appliance, check that the voltage shown on the data plate
matches that of your electricity and that the electric plug is grounded. In the event
of incompatibility between the electric outlet and the plug of the appliance, have
the outlet replaced with another more suitable type by professionally qualified
personnel, who will make sure that the section of the wires of the outlet is
appropriate for the absorbed power of the appliance. In general, the use of
13/36