Powering On The Cash Register - Olivetti NETTUN@7000 Open Kurzanleitung

POWERING ON THE CASH REGISTER

To power on the cash register, you must first have connected the power unit to the
cash register as previously described, then positioning the Toggle switch On and
then press the key. When the key is pressed the cash register powers on
and, after a brief interval, displays the sales environment. The cash register is now
operational.
When the cash register is on ( key lighted), it can be powered off by pressing the
key for about 1 second. This starts the power off phase if no other operations
are in progress.
Warning If the cash register is not used for a certain amount of time, it
automatically enters energy saving mode. The touch screen is switched off but
the key remains lighted.
To return the cash register at any time to operating mode and use it again just
touch the touch screen.
On-Off
Togglet
switch
Power on key
6