Installation - One for All SV 1740 Bedienungsanleitung

1. Connect the "SV-1740 USB-Transmitter" to your PC.
The "SV-1740 USB-Transmitter" is used as an external speaker of your PC or Notebook.
The audio from your PC will be transmitted by 2.4GHz signal to the "SV-1740
Receiver". The "SV-1740 USB-Transmitter" should display (see picture below) a blue
light.
2. Connect the "SV-1740 Receiver" to your audio
amplifier through the included cable.
Connect the (black) 3.5mm plug to the audio output on the back panel of SV-1740
Receiver and the (red & white) RCA RL plugs to the audio input of your audio
amplifier.
3. Connect the "SV-1740 Receiver" to your AC outlet
through the included adapter.
Connect the AC/DC adaptor to the DC input of the back panel of SV-1740 Receiver
and the AC plug to your AC outlet.
WWW.ONEFORALL.COM

Installation

blue light
indicator
3