Intended Use; Delivery Content; Operating Elements; Safety Instructions - Renkforce 1403322 Bedienungsanleitung

Operating instructions
Laminator, A4
Item no. 1403322

Intended use

The product is intended for finishing or protecting documents and photos of up to
A4 format, using suitable lamination pouches (not included). Two LED indicator lights
indicate the operating status. Power is supplied via a household mains outlet. The
product is protected against overheating.
It is intended for indoor use only. Do not use it outdoors. Contact with moisture, e.g. in
bathrooms, must be avoided under all circumstances.
For safety and approval purposes (CE), you must not rebuild and/or modify this product.
If you use the product for purposes other than those described above, the product may
be damaged. In addition, improper use can cause hazards such as short-circuiting,
fire, electric shock etc. Read the instructions carefully and keep them. Make this
product available to third parties only together with its operating instructions.
The product corresponds to the legal, national and European requirements. All
company names and product names are trademarks of their respective owners. All
rights reserved.

Delivery content

• Laminator
• Exit tray
• Operating instructions
Up-to-date Operating Instructions:
1. Open www.conrad.com/downloads in a browser or scan
the displayed QR code.
2. Select document type and language and enter the item
number into the search field. After submitting the query you
can download displayed records.

Safety instructions

Read the operating instructions carefully and especially observe the safety
information. If you do not follow the safety instructions and information on
proper handling in this manual, we assume no liability for any resulting
personal injury or damage to property. Such cases will invalidate the
warranty/guarantee.
• The device is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. These may
become dangerous playing material for children.
• Protect the product from extreme temperatures, direct sunlight, strong
jolts, high humidity, moisture, flammable gases, vapors and solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, take it out of
operation and protect it from any accidental use. Safe operation can no
longer be guaranteed if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stresses.
• Please handle the product carefully. Jolts, impacts or a fall even from a
low height can damage the product.
• The mains outlet must be located near to the device and be easily
accessible.
• Never pull the mains plug from the socket by pulling at the cable. Always
pull it from the mains socket using the intended grips.
• Unplug the mains plug from the mains socket if you do not use the device
for an extended period of time.
• Disconnect the mains plug from the mains socket in thunderstorms for
reasons of safety.
• Make sure that the mains cable is not squeezed, bent, damaged by sharp
edges or put under mechanical stress. Avoid excessive thermal stress on
the mains cable from extreme heat or cold. Do not modify the mains cable.
Otherwise the mains cable may be damaged. A damaged mains cable can
cause a deadly electric shock.
• Do not touch the mains cable if it is damaged. First, power down the
respective mains socket (e.g. via the respective circuit breaker) and then
carefully pull the mains plug from the mains socket. Never use the product
if the mains cable is damaged.
• A damaged mains cable may only be replaced by the manufacturer, a
workshop commissioned by the manufacturer or a similarly qualified
person, so as to prevent any danger.
• Never plug in or unplug the mains plug when your hands are wet.
• Before connecting the product to the power supply, check that the power
supply voltage and current rating corresponds to the power supply details
shown on the product rating label.
• The product gets hot during use. Ensure sufficient ventilation and never
cover the product during use.
• Never use the product immediately after it has been brought from a cold
room into a warm one. The condensation generated could destroy the
product. Allow the device to reach room temperature before connecting
and using it. This may take several hours.
• Never pour liquids over electric devices and never place liquid-filled
objects near the device. If liquid or an object enters the interior of the
device nevertheless, first power down the respective socket (e.g. switch
off circuit breaker) and then pull the mains plug from the mains socket.
Do not operate the product anymore afterwards, but take it to a specialist
workshop.
• The use of electrical devices must be supervised by trained staff in
schools, training centers, hobby and do-it-yourself workshops.
• In industrial facilities, heed all applicable accident prevention regulations
for electrical installations and equipment.
• Consult an expert when in doubt about operation, safety or connection of
the device.
• Maintenance work, adjustments and repairs may be carried out only by a
professional or at a specialist workshop.
• If you have questions which remain unanswered by these operating
instructions, contact our technical support service or other technical
personnel.

Operating elements

5
1 Exit tray 4 Power switch
2 READY indicator 5 Input slot
3 POWER indicator
1
2
3
4