Hama Cruiser III Bedienungsanleitung Seite 4

Step 4: Enter generic pass code"1234" to associate
(Pair") and connect the car kit with phone.
Step 5: Once you have entered the pass code, your
phone is the standard device for this car kit.
This car kit's LCD display shows "PAIRED".
Then, LCD shows Hans-free Profi le or Headset
profi le. Also, LCD display shows the name of the
paired phone. Pairing has been completed
successfully.
How to disconnect
Method 1 : Press L button once.
Method 2 : Switch off this car kit
Method 3 : Switch off your phone
Method 4 : Move the phone 10 meters away from this
car kit
How to re-connect
Method 1 : Press L button once.
Method 2 : From phone's Bluetooth menu.
Answer incoming calls
• Press (9) button.
• Press phone Answer call button.
Reject and hang up a call
• Press (8) button to reject or hang up.
• Or Press phone hang up button to end the call.
6
00016327bda.indd Abs2:6-Abs2:7 00016327bda.indd Abs2:6-Abs2:7
Volume up and down
• Press + to increase volume
• Press - to decrease volume
Mute Mic during conversation
• Press L to mute the mic. The display show "Mute On".
The mic is off.
• Press L again, the mic is on, display shows "Mute
off". The mic is automatically switched on once call
has been completed.
Call waiting
In conversation with 1st call, a new 2nd calls come in.
• Press (9) to activate 2nd call, keep 1st call waiting
• Press (9) again to re-activate 1st call and hold 2nd call
waiting
• Press (8) hang up 1st call and reactivate 2nd call
• Press (8) again to hang up 2nd call.
Call transfer
• Press C once to transfer the calls from car kit to
phone.
• Press C once more to transfer calls from phone to car
kit.
• For Nokia phones, press L to transfer calls from phone
to car kit.
Voice dialing
Press and hold C 2 seconds until you hear a tone that
indicates it is ready for speech recognition. Say the
desired name. The phone replays the desired name and
dials the related phone number.
Note: This voice dialing function is available for phones
supporting voice dialing.
CC
Making a call from 10-Received calls memory OR from
10 last Missed calls
• Press and hold (9) 2 seconds, display shows
"Call Rec. Received "
• Press + or – to select the telephone number you dial.
Press (9) to make an outgoing call.
Display Set up Menu
• Press and hold L for 2 seconds to enter setup menu.
• + Or – : forward/backward
• Press (9) confi rm selection
• Press (8) exit
Display setup fl owchat
7
05.11.2007 15:26:34 Uhr 05.11.2007 15:26:34 Uhr