Herunterladen Inhalt Inhalt Diese Seite drucken

Precautions; Safety Instructions - MOULDPRO DP 30 M Bedienungs- Und Wartungshandbuch

Entkalkungspumpen
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

5.3 - How to clean the pump
- After descaling REMOVE THE DESCALING LIQUID FROM THE TANK and wash out the pump by
circulating clean water through it for at least 10 minutes.
Only use MOULDPRO chemicals in order to ensure good working and avoid damaging the
equipments.
Once the lifetime of the pump has expired, do not dispose of it with household
waste. The pump must be recycled in authorized centres and can be assimilated to a
household appliance.
During handling lift the pump and do not drag it in order to avoid damages to the tank.
Temperature of the descaling solution must never exceed 50 °C.
Flexible hoses and fittings can be damaged in time; make sure to check the seal whenever using
the pump, as indicated in the pump preparation instructions.

6 - SAFETY INSTRUCTIONS

- Before installing the motor pump, make sure the power supply is fitted with grounding and
complies with the regulations.
- Avoid using the pump in places where there are liquids, gases, flammable powders or risk of explosion.
- Before plugging in the pump to the outlet, make sure the switch is off.
- The outlet must be suitable for the plug of the pump. Do not use non CE-marked defective outlets.
- Use (CE) approved extensions, only if necessary.
- Do not use plug adapter. Do not carry out any modifications to the plug nor to the electrical cable.
- Pump shall always kept in perfect efficiency.
- During maintenance operations, check the switch is off and the plug is not connected.
- All maintenance operations must be carried out by the authorized Technical Assistance Service.
- Only use MOULDPRO original spare parts.
- Do not carry out any modifications to the pump if not authorized by MOULDPRO Technical Department
(ask for written authorization).
- The warranty is not valid if the pump is repaired by personnel not authorized by the manufacturer, that
also means operating with unsafe and potentially dangerous equipment.
- Keep children and unauthorized persons away from the pump.
- Keep the pump out of reach of children and unauthorized persons.
- Do not use the pump if tired or under the effect of alcohol, medicines or drugs, do not eat or smoke.
- When using the pump, wear overalls, do not wear jewellery, keep hair away from the pump.
- When handling descaling liquids, be very careful. It is necessary to use Individual Protection Equipment
(IPE).

PRECAUTIONS

7

Werbung

Inhaltsverzeichnis
loading

Verwandte Produkte für MOULDPRO DP 30 M

Diese Anleitung auch für:

Dp 15 m

Inhaltsverzeichnis