Preliminary Inspection - MOULDPRO DP 30 M Bedienungs- Und Wartungshandbuch

Dear Customer, thank you for choosing a MOULDPRO descaling pump.
MANUAL
This manual is a safe guide for the use of the pump. Please read it carefully in all its parts before use.
This manual contains important information for the proper working and use of the equipment.
MOULDPRO reserve the right to introduce any future changes without notice or replacement.

PRELIMINARY INSPECTION

Upon receipt of the pump, take it out from the carton and check it is in perfect condition.
Also check that the data on the rating plate correspond to required ones (please see section
3 "Technical Features"). For any problem, immediately contact the supplier specifying the kind
of fault.
In case of doubt about the safety of the machine, do not use it.
DESCRIPTION
Vertical axis pumps with tank for descaling heat exchangers, pipes, coils and any similar scaled situation.
Pumps are supplied ready to use, in strong carton boxes with related user's manual.
Below are the main deposits which can be removed with these pumps:
- scale deposits.
3