Koenic KWDR 84612 A Gebrauchsanweisung Seite 27

• During the washing of large
and heavy single items such as
bedclothes, covers, bath towels,
jeans, lined winter jackets, etc.,
the drum can become unbalanced
especially during spinning. To
minimize imbalances always wash
several clothes together as one load.
• Linting clothes should be washed
and dryed separately, otherwise you
will have visible lint on all clothes,
especially on black clothes.
Fill the laundry
Fig.
7
• Untangle the garments and place
them neatly into the washing drum.
• If possible use the max. loading
capacity. Do not overload the
washing machine. Do not cram the
laundry in the washing drum but
load it in a way that the laundry
is still being circulated during the
washing process. Different sizes and
thicknesses of the laundry influence
the loading capacity.
• Close the door, making sure that no
laundry is trapped between the door
and the seal.
• Make sure to avoid imbalances when
washing heavy/ bigger pieces of
laundry.
IM_KWDR84612_180730_V06_HR.indb 27
Select and filling in detergent
Caution
• Keep detergents out of the reach of
children!
• Observe the instructions of the detergent
regarding dosage and storage.
• Detergent compartment C has no
function and must not be filled!
• Only use detergents suitable for washing
machines and make the right selection,
taking into account the kinds of laundry to
be washed (cotton, colored, white etc.).
• Do not use bleach, as it can damage the
washer-dryer and laundry.
1. Open the detergent drawer.
Fig.
8
Note the different compartments:
A: Detergent for main wash, option 1
for washing powder, option 2 for
liquid detergent
B: Fabric softener for rinsing
C: Detergent for pre-wash
(no function, do not fill!)
2. Fill in laundry detergent and fabric
softener according to manufacturer's
instructions.
Note on foam detection: If too
much detergent is used, excessive
foam is formed. The foam formation
is checked and excessive foam is
removed.
3. Close the detergent drawer by
pushing it in completely.
English
27
30/7/18 10:25 am