Werbung
Verfügbare Sprachen
Verfügbare Sprachen
40009L
(4) Next the cutting wire is guided from the inside to the outside between the car body and the
adhesive sealant using the enclosed parting awl. As illustrated in pictures 2 and 3, place the
cutting wire visibly in the forked opening of the parting awl. Then push the parting awl incl.
wire through the adhesive sealant.
Picture 2
(5) One end of the nylon wire is fixed at the wire holder (picture 4).
SW-Stahl GmbH
An der Hasenjagd 3
D-42897 Remscheid
Picture 3
Picture 4
Tel. +49 (0) 2191 / 46438-0
Fax +49 (0) 2191 / 46438-40
E-Mail: info@swstahl.de
Werbung
