Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Positioning the hands
If the hands do not agree with the time displayed digitally, positioning must be performed manually.
This step is also necessary after a battery replacement.
• Press button B (2) for longer than 5 seconds.
• The hands begin to run, and the indicator in the display flashes 00:00.
• To move the hands manually, press button A (1).
The hands will stop now.
If you press button A (1) briefly, the hands are moved stepwise. If you press a little longer, the
hands begin to run automatically, which you can stop by pressing button A (1) again.
• When the hands have reached the 12 o'clock position, press button B (2) briefly.
• The watch now starts a reception attempt.
• The watch automatically sets itself to the correct time after successful reception.
Setting the Time Manually
If time signal reception is not possible, the watch can also be set manually.
However, the precondition is that the 12 o'clock positioning of the hands has been performed cor-
rectly (see "Positioning the hands").
• Press button B (2) for approx. 2 seconds.
• Set the desired time zone using the button A (1). The time difference stated here always refers
to Greenwich Mean Time:
EU
European time zone (DCF, +1 h)
2H to 7H
Time difference +2 to +7 h
CN
Chinese time zone (+8 h)
JP
Japanese time zone (+9 h)
10H to 12H
Time difference +10 to +12 h
-12H to -9H
Time difference -12 to -9 h
US-P
USA, Pacific time zone (-8 h)
US-M
USA, Mountain time zone (-7 h)
US-C
USA, Central time zone (-6 h)
US-E
USA, Eastern time zone (-5 h)
-04H to -01H
Time difference -4 to -1 h
UK
English time zone (0 h)
If the time zone is set outside of the DCF time zone (+/-1 h), automatic DCF synchronisa-
tion will no longer take place and the DCF symbol (3) will disappear in the display.
• Press the button B (2) and change the mode for summer time adjustment using the button A (1):
AUTO = automatic change for summer/winter time
ON = manual setting for summer time on
OFF = manual setting for summer time off
• Press button B (2) and set the hours using the button A (1).
• Proceed as described above to set the minutes, the seconds, the year, the month and the date.
• Button B (2) is used to select the value to be adjusted, and the corresponding value can be
changed with button A (1).
• Finally, press button B (2) to save the settings and to return to the normal display mode.
• The hands run automatically to the set time.
Display reading
• The time is normally shown in the display.
• Press button A (1) to show the date and month.
• Press button A (1) again to show the seconds and the weekday.
• Press button A (1) again to show the set time zone.
• Press button A (1) again to return to the time display.
• The DST symbol (5) appears in the display during summer time.
Changing the Battery
• If a battery symbol is shown in the display (7), the battery has to be replaced.
• Replacing the battery should be done by a specialist, using special clockmaker tools and profes-
sional knowledge.
• To replace the battery, the back of the casing is removed.
• The battery can then be removed from its holder and be replaced.
Restart after Replacing the Battery
• After a battery change, the 00:00 indication will flash in the display.
• Position the hour and minute hands to the 12:00 position, as described in "Positioning the
hands".
• The watch now performs a reception attempt and will set itself to the correct time, after suc-
cessful reception.
Maintenance and Cleaning
The product does not require any maintenance and should never be disassembled for any reason.
Please use a soft, dry, clean cloth for cleaning.
Do not use aggressive detergents as these can cause discolouration of the case.
Impact resistance
In normal use, the wristwatch is protected against impacts. Nevertheless, do not expose it to ex-
treme shocks such as it might occur if it falls onto a hard surface. This may damage the clockwork
or the position of the hands may be changed (Positioning the hands is described earlier in this
manual).
Water tightness
Please take note of the labelling on the watch and its meaning.
Label
Suitability
none
The watch has to be protected against water
3ATM
Washing your hands, rain, water spray
5ATM
See above + bathing, showering
10ATM
See above + swimming, snorkelling
20ATM
See above + free diving
Disposal
a) Product
Electronic devices are recyclable waste materials and must not be disposed of in the
household waste!
Please dispose of the product, when it is no longer of use, according to the current
statutory requirements.
Remove any inserted battery and dispose of it separately from the product.
b) Batteries and rechargeable batteries
As the end user, you are required by law (Battery Regulation) to return used batteries and re-
chargeable batteries. Do not dispose of used batteries in the household waste!
Batteries/rechargeable batteries are labelled with the symbol shown to indicate that
disposal with household waste is forbidden. The symbols of the critical heavy met-
als are: Cd=cadmium, Hg=mercury, Pb=lead (marking can be seen on the battery/
rechargeable battery, e.g. underneath the refuse bin symbol shown on the left).
You can return used (rechargeable) batteries free of charge at the official collection
points in your municipality, our stores, or where ever (rechargeable) batteries are
sold!
You thereby fulfil your statutory obligations and contribute to the protection of the environment.
Technical Data
Operating voltage.........................................3 V/DC
Battery ...........................................................1 x lithium button cell CR2016
Battery life .....................................................ca. 1 year
Weight ............................................................48 g
Declaration of Conformity
We, Conrad Electronic SE, Klaus-Conrad-Straße 1, 92240 Hirschau, hereby declare that this
product adheres to the fundamental requirements and the other relevant regulations of Directive
1999/5/EC.
You can find the conformity declaration for this product at www.conrad.com
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication represent
the technical status at the time of printing.
© Copyright 2015 by Conrad Electronic SE.
Werbung
