Functional Description - HotTable 10202-TSR-MS Originalbetriebsanleitung

Read all safety warnings and
all instructions!
Failure to follow the warnings and instruc-
tions my result in electric shock, fire and/
or serious injury.
Intended use
The heater is intended for warm people in
outside places (bar, restaurant, balconies,
terrace...).
Product Features
The numbering of the product features re-
fers to the illustration of the machine on
the graphics page.
1. Screws
2. Connector part
3. Screws
4. Power supply connector
5. Power supply cable
6. Table top
7. Middle heating part
8. Heating area cover
9. Sensors* / Power buttons*
10. Base
11. Foot ring*
12. Adjustable pad
13. Screws
* The accessories illustrated or described are not
included as standard delivery.
Assembly
a) Take all parts from carton box and
check all parts to be no damaged.
b) Put the middle parts to foot base
and screw together tight.
c) Put the connector part to middle
part and screw together tight.
d) Put the table top on connector and
screw together.
e) Connect together connector from
cable line and table connector.
f) Plug on.

Functional Description

Operating
1. Smart power series
a) When plug on the heater will blue
led on sensors indicate standby
mode (0,2s ON, 2s OFF).
b) When motion sensors sense mow-
ing around the table (up to 60 cm)
will automatically switch on heat-
ing. The heating power will be ad-
justed automatically, depend the
ambient temperature.
c) If no sensing 3 minutes will heat
automatically shut off.
d) The heating will not start if the
ambient temperature higher than
18°C.
e) The heating will shut off if the up-
per part temperature increases to
70°C. Cannot operate until tem-
perature drop under 50°C.
f) The heating will shut off if the ta-
ble incline is more than 45 degree.
Cannot operate until inclines is sta-
bilized and reconnect the power.
2. Switch and remote control series
a) When plug on the heater will blue
led on buttons indicate power sup-
ply connected.
b) When one of buttons pressed will
start heating, when press button
again will shut off.
c) The heating will shut off if the up-
per part temperature increases to
70°C. Cannot operate until tem-
perature drop under 50°C.
d) The heating will shut off if the ta-
ble incline is more than 45 degree.
Cannot operate until inclines is sta-
bilized and reconnect the power.
English | 5