Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
6. Switching vibration effects on/off
There are 3 modes available: Force Feedback, Dualshock™ and effects switched off.
GB
Force Feedback effects are switched on by default. Dualshock™ effects are less intensive than
Force Feedback effects.
Changing the mode:
1.
Simultaneously press the Start+ R1+L1 buttons to switch between vibration modes. Repeat
this until you have set the required mode.
The LEDs on the steering wheel blink briefly each time. The different colours indicate which mode
has been selected:
Mode
DualshockTM
Force Feedback
Vibration off
7. Programming function:
1.
Simultaneously press the Start button, right directional button and the button (or pedal) whose
function you wish to reassign.
2.
Now press the button (or pedal) you wish to assign a new function to.
7.1. Programming the gas and brake pedal
The two pedals are assigned the gas and brake function by default (as also the X and buttons).
The gas and brake function can be switched to the following buttons:
, , L1, L2, R1, R2.
With some games, it may be necessary to reassign the up and down function of the right analogue
ministick of a gamepad to the pedals:
1.
Press Start + Right arrow +Gas pedal to assign the up function of the ministick to the gas
pedal.
2.
Press Start+Left arrow +Brake pedal to assign the down function of the ministick to the brake
pedal.
Note: This function is only supported in analogue mode and only by game consoles.
By unplugging the steering wheel from the PC or game console, any programming you have un-
dertaken is reset to the default functions.
Red LED
X
X
14
Yellow LED
X
X
Werbung
Inhaltsverzeichnis
Fehlerbehebung
