Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Video camera module BEC-200
Description:
1.
Fastening screw
2.
Camera with infrared light
3.
Connection terminals
Terminal V/W: Video signal output
Terminal +/-: Power supply (15 VDC)
Terminal a/b: i2-BUS
(Camera status indication on / off)
4.
Status LED
The BEC-200 has an automatic shutoff function.
If necessary, the camera automatically power on/off
(not shown)
5.
Heating
The BEC-200 has a heating which prevents
freezing / fogging of the camera.
Installation instructions:
The camera must not be aimed at:
- lamps or other sources of light
- direct sunlight
- bright or high-contrast picture backgrounds
- highly reflective walls
Recommended installation height approx. 1.60 m
Technical data:
System:
Video signal:
Resolution:
Photosensitivity:
Aperture angle:
Adjustment range:
Technical additions and printing errors do not constitute grounds for any claims to damages.
Art.Nr.: 0221170
Camera adjustment:
a) Loosen the fastening screw with
the enclosed key until the camera
can be moved easily.
b) Align the camera.
c) Secure the camera setting
by tightening the fastening screw.
b
a
c
-
V W +
a b
3
i2-BUS 6wire video system
Symmetrical 1 Vp-p Z = 100 Ohm
320000 pixels
0.1 Lux / F2.0
60° vertical 80° horizontal
+/- 47° horizontal / vertical
Hotline: hotline@elcom.de
AN_BEC-200_EN_110322
1
4
Detachable connection terminal block
Connecting wires:
Simply plug in the wire.
(Solid conductor Ø 0.4-0.8 mm)
Disconnecting wires:
Press orange clip.
Pull out the wire.
Camera range:
0,5m
Vertical
2
0,5m
0,75m
Horizontal
Werbung
