Werbung
4.Changing the reversible door
4.Changing the reversible door
Reversing the door
The side at which the door opens can be changed from the right side
(as supplied) to the left side, if the installation site requires.
Warning! When changing the side at which the door opens, the appli-
ance must not be connected to the mains. Remove plug from the
mains beforehand.
Tilt the appliance slightly towards the
rear and prop it securely.
Unscrew the door hinge screws
and remove the hinge pin bracket .
Open the door a little way and take it
out downwards.
Unscrew the upper pin and screw
it into place on the opposite side.
Fit the door into the upper pin
and close it.
Screw the hinge pin bracket
side using the screws .
securely into place on the opposite
TOP WORK
TOP WORK
5 5
Werbung
