Setting The Transmission Output; Further Notes - Odys Mp3 Car Connector Benutzerhandbuch

3.4

Setting the transmission output

If there is interference in the reception caused by other FM radio stations
when operating the FM transmitter, you can use the transmission output
to counteract the interference. Your device has two output levels: High
power and low power. You can toggle between the two output levels
using the switch on the back of the device. The LED on the main device
lights red at high power and green at low power.
There may be local legislation limiting the maximum values for
the transmission output. Ensure that you observe these
regulations.
3.5

Further notes

The operating voltage for the device is +12 V. Excessive or
insufficient voltage can damage the device or cause it to
malfunction.
As a precaution, connect the USB stick or the external audio device
before connecting the car adapter to the 12 V car electrical system.
The device may not be compatible with all USB sticks by all
manufacturers.
The frequency of the car FM radio must match that of the device.
Do not disconnect the USB stick from the device during playback.
Stop playback before you do so.
If the USB stick contains very many audio files, there may be delays
in operation.
Do not operate the device for excessive periods without interruption
to extend the service life of the device.
ODYS MP3 Car Connector
7