Thrustmaster T-x3 Benutzerhandbuch Seite 7

USING THE DC OUT CABLES
The T-X3 Battery Grip features 2 DC OUT cables, allowing you to recharge your PSP™ in 3 different
positions (Open, Stand or Closed).
x
Retractable DC OUT cable (3)
(located on the right-hand side of the Battery Grip)
- Remove the connector from its dedicated spot and pull it out gently to bring out the cable.
- Do the reverse after use to store the cable again.
x
Enclosed DC OUT cable (4)
(located on the left-hand side of the Battery Grip)
- Open the cable storage compartment cover (the one with OPEN written on it).
- Remove the connector and thread the cable through the corresponding notch.
- Close the cable storage compartment cover.
- Do the reverse after use to store the cable again.
6/10