Synchronizing With The Current Time - Mitsubishi Electric PAC-YT32PTA Anweisungshandbuch

4. Synchronizing with the current time

1 Press the [SET/MONITOR] button and select the "SET" Mode.
2 If the time is advancing, press the CLOCK ADJUSTMENT button [
• Each time the [
time advances in 1-minute units, then when the bottom digit becomes 0, it advances in 10-minute
units.
When pressed continuously, the minute digit returns to 0 and advances in 1 hour units.
3 To reverse the time, press the [
• Each time the [
time advances in 1-minute units, then when the bottom digit becomes 0, it reverses in 10-minute
units.
When pressed continuously, the minute digit returns to 0 and advances in 1 hour units.
* At the point when the CLOCK ADJUSTMENT buttons [
at 0 and the clock starts running.
4 After the time adjustment is completed, press the [SET/MONITOR] button and return it to the "MONI-
TOR" mode.
* As will be explained later on, the current time display indicates the starting time of the time interval
(30 minute units) that is the object of adjustment during adjustment of the daily timer (for example, in
the 0:00 to 0:30 interval, 0:00 is displayed). To return the display to the current time display from the
starting time interval display, press the [
[SET/MONITOR] button and set the "MONITOR" mode.
6
I I I
S M T
SET
L L L
M O NIT O R
SET/MONITOR
MODE A/B/OFF
WEEKLY SETTING
CLOCK
PAC-YT32PTA
14 3
] button is pressed, the time advances 1 minute. If it is pressed continuously, the
] time adjust button and set the time.
] button is pressed, the time reverses 1 minutes. If it is pressed continuously, the
MODE A MODE B
I I I I
W T F S
L L L L
0 3 6 9
12 15 18 21
SET BACK
DAY SET BACK DAILY TIMER MODE A/B
ON/OFF/SET BACK
L
TODAY
DAILY SETTING
2
], [
] or [ ] CLOCK ADJUSTMENT button once, or press the
12
24
], then set the time.
] are pressed, the seconds digit is set