Ultrabasic Meter Quick Reference - Denver Instrument Ultrabasic Betriebsanleitung

UltraBasic Meter Quick Reference

1. Connect an AC adapter to the
power connection.
2. Connect an electrode to the Input
and ATC connectors, if desired.
3. Press mode until the display
indicates the appropriate measure-
ment mode (pH or mV/relative
mV).
4. Standardize the meter using up
to three buffers by immersing the
electrode in a buffer, stirring, then
pressing standardize to enter each
buffer.
5. The display shows the current
reading in pH, mV, or relative
mV units.
6. Press setup to review electrode
calibration and to clear or select
buffer sets.
S
4 7 10
mode
standardize
UltraBasic
°C
pH
setup
enter
7