Connecting The Receiver - Swiss Brand Switel BCF820 Bedienungsanleitung

Putting the Units into Operation

Connecting the receiver

Attention: Position the receiver with a minimum distance of 1 m to other electronic devices,
otherwise there is a risk of mutual disturbance.
Operating with a power adapter plug
Connect the charging station of the receiver as illustrated in the diagram. For safety reasons, only use
the power adapter plug supplied.
Attention: Only use the power adapter plug supplied. Ensure access to the power adapter
plug is not obstructed by furniture or such.
Operating by rechargeable battery
Slide the battery compartment cover on the rear of the receiver
downwards. Insert the battery with the contacts facing down.
The receiver is supplied together with a rechargeable lithium ion battery (3.7 V, 1200 mA).
Registering the receiver and transmitter / Establishing a connection
The receiver and transmitter are registe-
red. If necessary, registration can also
be completed manually:
3. Press and hold the Brightness
control (3) and, while doing so,
switch the LCD switch (9) to ON.
4. Insert a small pointed object in the
opening at position (20) to actuate
the Pairing button once. The
connection LED on the Camera unit
flashes briefly.
5. 1. Pair ID for Cam1 appears in the display.
6. Then switch the LC display switch (9) OFF and ON again.
When a connection is established, the image viewed by the lens appears in the display.
If you use several Camera units, you must press the Pairing button the respective number of
times.
42
Mains power outlet
Monitoring unit (receiver)
9
Lithium
ion battery
3.7 V,
1200 mA
12
Camera unit (transmitter)
3
20