Specifications - Belkin F5C412uk140W Benutzerhandbuch

To connect the Belkin 300-Watt Inverter directly to the 12-volt power source
(battery), follow the steps as outlined below:
1. Push the adapter plug leading from the Inverter firmly into the
Direct-Connect Cable socket.
2. Properly identify the positive (red) and negative (black) terminals on the
12-volt power source and make certain that the terminals are clean and dry.
3. Connect the RED alligator clip to the positive (+) terminal on the power
source, and the BLACK alligator clip to the negative (-) terminal on the
power source.
4. Plug your equipment or appliance into the AC receptacle on the Inverter.
5. Turn the Inverter's power switch to the ON position.
6. Confirm that the LED power indicator light on the Inverter is glowing
GREEN. This means the Inverter is "ready for action".
7. Turn on the equipment or appliance.

Specifications

Max.Continous Power
Surge efficiency (Peak)
No Load Current Draw
Waveform
Operating Input Voltage Range
Output Voltage Range
Automatic Input Power Shutdown
Output Frequency
Fuse (Amperes)
Space Fuse (Amperes)
Lenght
Width
Height
Weight
Class II product
Polarity
Low battery alarm
Low battery shutdown
F5C412uk140W*
F5C412eb140W
140 Watt
300 Watt
<0.1 Amps
Modified Sine Wave
11-15 volts DC
AC 230V ±5% (AC 240V ±5%)*
≤10.4 Volts - ≥15 Volts
20 A
20 A
160 mm
90 mm
65 mm
680 g
yes
negative (-)
to ground
10.4 Volt
9.8 Volt
F5C412uk300W*
F5C412eb300W
300 Watt
500 Watt
<0.2 Amps
50 Hz ±3Hz
30 A
30 A
160 mm
90 mm
65 mm
680 g
yes
negative (-)
to ground
10.4 Volt
9.8 Volt