Chal-Tec Auna IR-130 Bedienungsanleitung Seite 23

1.7.5 Configuration-Alarm Clock
Description: Alarm Clock setting, Alarm Clock goes off on the setting time.
Function Indication:
1. Alarm Clock types (3 Alarm Clock setting）
Alarm Clock (1): You can select your favorite Alarm setting for every day
Alarm Clock (2): Same as (1)
Alarm Clock (NAP): You can set a certain time such as 1 hour later/2hours later/any hours later as
you wish from the beginning setting.
2. Alarm Clock NAP types: (one choose only)
5minutes (NAP): Alarm Clock goes on after 5minutes (1 time only)
10minutes (NAP): Alarm Clock goes on after 10 minutes (1 time only)
20minutes (NAP): Alarm Clock goes on after 20 minutes (1 time only)
30minutes (NAP): Alarm Clock goes on after 30 minutes (1 time only)
60minutes (NAP): Alarm Clock goes on after 60 minutes (1 time only)
90minutes (NAP): Alarm Clock goes on after 90 minutes (1 time only)
120minutes (NAP): Alarm Clock goes on after 120 minutes (1 time only)
3. Alarm Sounds setting:
1) Beep
2) Melody
3) Radio
Remark: Alarm Clock（NAP）- Beep only
4. When the alarm clock goes on, press any key to stop the ring and goes to standby display.
5. You also can set Alarm Clock with 'Alarm' key from remote control.
Remark:
[1] You can select any internet station as Alarm tone from the function of internet station. When the
internet station doesn't work in 1 minute, it will auto set into Beep.
[2] Alarm tone is fixed on volume 15
[3] Alarm Clock stops 1 hour later in auto
1.7.6 Configuration－Language
Description: Language setting
Function Indication: 1. Language options
1.English 2.German 3.Spanish 4.French 5.Portuguese 6. Italian
Remark: When you enter this menu, it will remain on the previous option, you need to press "Select"
or "Enter" to confirm the setting.
1.7.7 Configuration－Dimmer
Description: Set the Screen Backlight
Function Indication: 1.Options
1) Power Saving
Remark: when the backlight is under the Low-power mode, it will turn into highlight when you press
any key, and low-power mode will be Auto started again after 15 minutes without any operation.
2) Turn on (Default setting)
20 Levels option of backlight
Remark: When you enter this menu, it will remain on the previous option, you need to press "Select"
or "Enter" to confirm the setting.