Atari FLASHBACK 8 GOLD Anleitung Seite 2

IMPORTANT: READ BEFORE USE
In very rare circumstances, some people may experience epileptic seizures when viewing
flashing lights or patterns in our everyday life. Flashing lights and patterns are also
common to almost any video game. Please consult your physician before playing ANY
video game if you have had an epileptic condition or seizure OR if you experience any of
the following while playing - Altered vision, eye or muscle twitching, mental confusion or
disorientation, loss of awareness of the surroundings or involuntary movements.
It is advised to take a 20-minute rest after 1 hour of continuous play.
®
Atari Flashback 8 Gold Console
Appearance and Key List
The image below shows the location of the connectors and buttons. Each
function is outlined below (the illustration is for reference only).
1 2
6
1 Power
Turn the game console's power ON/OFF.
START (Original RESET Button)
2
Press this button to begin or reset most games.
3
Difficulty Button - Left Player
Press this button to switch between one of two difficulty levels in most games.
4
Difficulty Button - Right Player
Press this button to switch between one of two difficulty levels in most games.
5 SELECT
Select game option.
6
Left Player Game Controller Jack
Game controller connected to this jack controls games in 1-player games
and controls the first player in 2-player games. Note that some two player
games alternate use of the left player joystick.
7
Right Player Game Controller Jack
Game controller connected to this jack controls the second player in
2-player games.
3 4 5
7
1
9 8
AC Adapter Specification
INPUT: 100V-240V AC/50HZ-60HZ
OUTPUT: DC 5V/2A
PLUG:
NOTE
• Must use the AC adapter included as power supply to the console.
• Do not connect the AC adapter to the power input other than the above specifications.
• AC adapter is not a toy.
• The socket-outlet shall be installed near the equipment and shall be easily accessible.
Wireless Game Controller
Appearance and Key List
The image below shows the location of the connectors and buttons. Each
function is outlined below (the illustration is for reference only).
1
Joystick
Push joystick to move.
2
Power Indicator
Press any key and the indicator
will blink if there is still battery
power left in the controller.
3
Fire Button
Press button for most in-game
actions.
4 REPLAY
Press the button to rewind gameplay by 7 seconds.
5
START
Press the button to start the game and press it again to pause the game.
SELECT
6
Press the button to change menu order and to select stage in game play.
7 RESET
Press the button to get back to menu.
HDMI Output
8
Plug the HDMI cable into this port,
then into your television.
9
AC Adaptor Jack (DC 5V)
The power adaptor plugs into this port,
then into your AC outlet.
P2
1
2
3
P1
7 6 5 4
P1 ONLY
2