Omnitronic IM-500 Bedienungsanleitung Seite 2

USER MANUAL
INSTRUMENT MICROPHONE
Condenser Microphone for
The OMNITRONIC
studio and live applications and is ideally suited for
electric instruments . The microphone is supplied with a
the microphone requires 9-52 V phantom power.
Safety Instructions
Ÿ Maintenance and service operations are only to be carried out by authorized dealers. Damage,
caused by manual modifications on this device is not subject to warranty. If the microphone is used
for other purposes than originally intended or if it is not correctly connected, the product may suffer
damages and the guarantee becomes void.
Ÿ Protect the microphone against humidity and heat. The ambient temperature must always be
between -5° C and +45° C.
Setting into Operation
Screw the holder onto a stand with 1.5 cm thread. For stands with 1 cm thread use the supplied
adapter screw. Insert the microphone into the holder from above. Connect the microphone via a
balanced microphone cable with 3-pin XLR plug to the XLR microphone input equipped with phantom
power of your audio unit (e.g. mixing console). If the audio unit does not provide any phantom power,
connect the microphone to the audio unit via a phantom power supply unit (e.g. OMNITRONIC LH-
051). Place the windshield, if required.
Cleaning
For cleaning the microphone only use a dry cloth. Never use chemicals or water.
Technical Specifications
Type: ...........................Condenser (back electret)
Directivity pattern: .......Cardioid
Frequency range: ........50 Hz - 18 kHz
Impedance: .................200
Sensitivity: ...................-45 dB
Max. SPL:....................136 dB
S/N ratio: .....................>60 dB
Phantom power: ..........9-52 V
Weight: ........................200 g
Please note: Every information is subject to change without prior notice. 10.07.2009 ©
Instrument pick-up
IM-500 is a condenser microphone with cardioid characteristic designed for
W
direct or overhead sound pick-up of acoustic and
stand holder and a windshield. For operation,
00052357.DOC, Version 1.0
www.omnitronic.com
IM-500