Using The Seat Heater - Dometic MAGICCOMFORT MSH60 Montage- Und Bedienungsanleitung

MSH60, MSH601
Electrical connection
The seat heater MagicComfort MSH60 has one switch each for the driver's and
passenger seats, the seat heater MagicComfort MSH601 only one for the seat
chosen.
The complete circuit diagram can be found in fig. h, page 6.
A
NOTICE!
Ensure it has been securely fitted, particularly in the area of the seat rails.
➤ Find a suitable place for installing the seat heater switch.
If possible, use the blanking plugs provided for this purpose.
Ensure that there is enough room behind the panel for the installation of the
switch.
➤ Mark the switch cut-out using the template provided (fig. g, page 5).
➤ Cut out the marked area with an appropriate tool.
➤ Install the switch into the cut-out (fig. d, page 5).
➤ Install the ready-made wiring harness so that the cables cannot bend or fray
(fig. e, page 5).
8

Using the seat heater

➤ Switch on the seat heater using the corresponding switch (level
➤ To switch the seat heater off: Put the corresponding switch into the middle
position.
EN
Using the seat heater
or level
15
).