Settings; Changing Between Auxiliary Connection And Fm Transmission; Setting Your Highway To Enter Standby Automatically; Radio Settings - PURE Highway 600 Bedienungsanleitung

Settings

Changing between auxiliary connection and FM transmission

You can choose how your Highway is connected to your vehicle's audio system.
1. Press .
2. Turn and press the Select dial to choose 'SETTINGS' > 'AUDIO OUT'.
3. Turn and press the Select dial to choose how to connect your Highway to your vehicle.
• If you've connected your Highway with an auxiliary cable, choose 'LINE OUT'. Then turn and press the Select dial to choose
a gain setting of 'LOW' or 'NORMAL'. If the audio sounds distorted, choose 'LOW'.
• If you're connecting your Highway over FM radio, choose 'FM TRANSMIT' and then choose an FM frequency. Ensure a
radio station isn't using the frequency you choose.

Setting your Highway to enter standby automatically

By default, your Highway enters standby after 4 hours, but you can change the delay.
1. Press .
2. Turn and press the Select dial to choose 'SETTINGS' > 'AUTO STANDBY'.
3. Turn and press the Select dial to choose a delay between 1 and 8 hours.

Radio settings

Performing an autotune
If you can't find any digital radio stations, try retuning your Highway.
To perform an autotune, press and hold the Select dial when you are in digital radio mode.
l
Listening to alternative stations when the signal is weak
If the current radio station has a weak signal, your Highway automatically tries to find a stronger signal.
If your Highway can't find a stronger signal for the current radio station, it can automatically tune to a similar radio station when
supported by the broadcaster.
18