Furniture Instructions - ipdesign flow Bedienungsanleitung

Furniture instructions

The adjustable back of the model flow works by shifting of weight and by using a lug.
This lug releases the locking of the position of the back. To get back in the basic position a
gas-pressurized spring is built in. To adjust the back the user needs to pull up the lug and
then can adjust the back by putting pressure or releasing the back.
The strength of the gas-pressurized spring causes that the back is moved up by releasing.
Buy putting pressure with the help of shifting the own weight against the power of the
spring the user can adjust the back to the required position.
Use of the lug:
Pull up
Releasing the lug
12
Unlocking and adjusting the back.
Blocking the back of the chair.