Winkel SX9 Bedienungsanleitung Seite 3

5. Clean all parts able to disassemble (refer to the section of "maintenance and cleaning").
6. When assembling, please carefully read the diagram of "the names and the positions of
the main components".
7. Please carefully read the "warning" before using.
*Juicing
1. Before using, please confirm the button switch of the main machine in stop state, in this
way, in case the assembly is not completed, starting the main machine can be avoided,
so unnecessary damage for persons or property avoided.
2. Before juicing, first confirm juicing net and rotor clutched in position, and no hard
contact between juicing net cutter and transparent cover. Put the transparent cover on,
put the handle into the cover slot, and then turn on the device.
3. For using, assemble according to the diagram of "the names and the positions of the
main components". Turn on power supply, press switch to let the machine run no-load
for 5sec. Put prepared vegetables or fruits into feed port of the juicer, press with the
pushing bar, evenly, hard and slowly, juice of vegetables or fruits will pour, original, fresh,
good for health.
4. Note: when pressing food with the pushing bar, force shall be even or indirect, pressing
force shall not be more than 1 kg, no too sudden force, otherwise, juicing effect will be
reduced.
*Operating time:
This machine is designed with button switches of O grading, I grading, II grading (O for
stop, I for weak grading, II for strong grading). For juicing, select strong grading, for
operating time, after operating for 1min, stop for 1min, then use again. After the
previous operation is done for three times, stop for 15min, do not operate until the motor
is cooled, in this way, service life of this machine will be prolonged, the machine will
serve you more efficiently.
*Warning:
1. This machine is unavailable for the weakness, unresponsive or psychopathic person
(including children), unless under the direction or help from the person who have the
responsibility for security. Children should be overseen, so it can be testified that they
are not playing with it.
2. Before using, put this machine on a stable and even table; operate according to the
above methods.
3. Before juicing, first confirm juicing net and rotor clutched in position, and no hard
contact between juicing net cutter and transparent cover. Put the transparent cover on,
fasten tight the handle, and then turn on the machine.
4. Before being used, the motor works in running-in phase, there may be slight particular
smell and spark, this is normal, after the motor works for some period, the above
phenomenon will disappear.
5. During juicing, make sure there is not too full juice and residue in the middle seat and
waste container, if it is too full, please cut off power supply, clean up, and then use
again.
6. During using, do not open the cup cover. In case power supply is on, do not put hand or
any ware into the mixing cup or feed port, otherwise, harmful accident may occur or this
machine may be damaged.
7. In order to prolong service life of this machine, over-temperature protective device is
mounted in the motor. If the motor works for a long time or overloaded, when over