How Do I Replace The Wheels; Front Wheels; Rear Wheels - WheelzAhead ULTRASOFT WHEELZ Bedienungsanleitung

2 How do I replace the wheels?

Front wheels

1.
2.
3.
Please note!
We advise treating the bolt with Loctite 435 before insertion.

Rear wheels

1.
2.
3.
4.
1
4
Please note!
We advise treating the bolt with Loctite 435 before insertion.
Don't forget to readjust your brakes and check they are working properly!
4
User manual WheelzAhead
Loosen the bolt that forms the wheel axle with a hex key and remove the bolt
and nut.
Remove the wheel and position the new wheel in the front fork.
Reinsert the bolt and tighten well.
Remove the plastic cover from the cover fastening ring on the outside of the
wheel axle.
Loosen the bolt that forms the wheel axle with a hex key and remove the nut,
the cover fastening ring, the wheel and the small ring from the bolt.
(TIP: lay the parts down in the order you removed them - this will make it
easier to attach the new wheel).
Position the new ring, the new wheel, the cover fastening ring and the nut on
the bolt and tighten well.
Re-attach the plastic cover to the cover fastening ring on the outside of the
wheel axle.
ULTRASOFT WHEELZ
®
2
5
3
6