KLOTZ di-box dx10 Bedienungsanleitung Seite 8

re-amping
Re-amping is an interesting recording method in which various
sounds can be added to pre-recorded guitar signals. It is not a
new invention, but has been common practice for decades.
In re-amping, a previously recorded guitar signal is retrans-
mitted through the guitar amp and re-recorded.
1. Set up your system as usual with the KLOTZ dx10 and make a "clean"
recording of the signal from "Balanced Out" on a separate track.
2. At the same time, use a microphone to record the signal from the
guitar/amp, likewise on a further separate track.
3. Now you can retransmit the "clean" track to the guitar amp via the
KLOTZ dx10 and re-record it, adding whatever sound you like.
4. To do this, connect the output of the mixer channel in question with
the "Balanced Out" of the KLOTZ dx10 and the "Input" of the KLOTZ
dx10 with your guitar amp. Please note that you will need a female-
female XLR adapter (XLR Gender Changer, KLOTZ AIS article number:
XLR-FF).
5. Now you're ready to explore the wonderful world of re-amping!
You can record your clean original track through various amps with a
range of different sounds, add effects, try out mic positions, etc.
6. This is the classic form of re-amping. However, re-amping can also be
performed using software. To do this, feed the previously recorded
clean signal into your recording software via an audio interface. It
can then be edited by adding one or several guitar sounds from a
plugin.
8