Seite 3
KLOTZ DX10 passive di-box instruction manual english contents introduction connections and controls application examples re-amping FAQs technical specs and dimensions warranty bedienungsanleitung deutsch...
Seite 4
Thank you for choosing this KLOTZ AIS product! Our KLOTZ DX10 passive DI Box is a top-quality product made in Germany. made in Every product from our company undergoes rigorous material and functional testing. KLOTZ AIS therefore grants a 5-year warranty on the KLOTZ DX10 assuming correct use of the product.
Seite 5
The KLOTZ dx10 is a passive DI box; unlike active DI boxes, it does not require an external power supply. Just connect...
Before you connect the KLOTZ dx10 with your equipment, set the volume of your instruments and amplifiers and your mixer faders to “0” or “-∞”. This prevents that notorious “pop” when you plug in your instrument, as well as protecting your ears – and your PA system.
Seite 8
In re-amping, a previously recorded guitar signal is retrans- mitted through the guitar amp and re-recorded. 1. Set up your system as usual with the KLOTZ dx10 and make a “clean” recording of the signal from “Balanced Out” on a separate track.
Seite 9
FAQs Why is the output of the KLOTZ dx10 not as loud as signals from other sources such as a keyboard? The KLOTZ dx10 is a passive DI box, designed to output a balanced signal at mic level. It is compatible with standard mic inputs on a mixer.
technical specs and dimensions housing: extremly solid V2A steel frame dimensions: L = 103 mm; W = 75 mm; H = 49 mm L = 103 mm technical data unbalanced input and output: 6.3 mm jack socket balanced output: XLR 3p. male max.
Seite 11
We applied the same high quality standards when choosing the other components. The ultra-rugged housing easily copes with the stresses and strains of live performance. We’re so convinced by our quality that every KLOTZ DX10 carries a 5-year warranty!
Seite 13
passive di-box dx10 bedienungsanleitung...
Seite 15
KLOTZ DX10 passive di-box bedienungsanleitung deutsch inhalt einleitung anschlüsse und bedienelemente praxisbeispiele re-Amping FAQs technische daten und maße garantie...
Seite 16
Vielen Dank, dass Sie sich für ein Produkt von KLOTZ AIS entschieden haben. Die passive DI-Box KLOTZ DX10 ist ein absolut hochwertiges Qualitätsprodukt made in „Made in Germany“. Jedes Produkt aus unserem Haus muss sich einer strengen Material- und Funk- tionskontrolle unterziehen.
Auch bei den restlichen Bauteilen haben wir uns für hochwertige Qualität ent- schieden und das superstabile Gehäuse macht problemlos den harten Einsatz im Livebetrieb mit. Davon sind wir so überzeugt, dass wir auf die KLOTZ DX10 eine 5-jährige Garantie geben!
anschlüsse & bedienelemente input ansicht input thru instrumenteneingang instrumentenausgang 0 dB/- 20 dB absenkung des eingangspegels um 20 dB output ansicht lift/Gnd groundlift (unterbrechung der masseverbindung) zur vermeidung von brummschleifen balanced out symmetrischer ausgang Versenkte Buchsen und Schalter bieten hervorragenden Schutz vor unbeabsich- tigtem Einsatz.
Seite 19
Bevor Sie die KLOTZ DX10 mit Ihrem Equipment verkabeln, stellen Sie die Lautstärkeregler der Instrumente und Verstärker sowie die Fader am Mischpult auf „0“ bzw. „-∞“. Das vermeidet nicht nur das typische laute Knacksen beim Einstecken, sondern schont auch Ihre Ohren und Ihre Anlage.
Seite 20
Dabei wird ein bereits aufgenommenes Gitarrensignal noch einmal durch einen Gitarrenverstärker geschickt und erneut aufgenom- men. 1. Verkabeln Sie Ihr Setup wie gehabt mit der KLOTZ DX10 und nehmen Sie das Signal aus dem „Balanced Out“ mit einem Cleansound auf eine eigene Spur auf.
Seite 21
Warum ist der Ausgang der KLOTZ DX10 nicht so laut wie etwa das Signal von einem Keyboard? Bei der KLOTZ DX10 handelt es sich um eine passive DI-Box, die konzipiert wurde, um ein symmetrisches Signal auf Mic-Level auszugeben. Damit ist sie kompatibel zu den üblichen Mikrofoneingängen an Misch-pulten.
technische daten & maße gehäuse: extrem stabiler V2A stahlrahmen maße: L = 103 mm; B = 75 mm; H = 49 mm L = 103 mm technische daten unsym. ein- und ausgang: 6.3 mm klinken buchse symmetrischer ausgang: XLR 3p. male max.
Seite 23
Bei der Auswahl der jeweiligen Bauteile haben wir natürlich die gewohn- ten hohen Qualitätsstandards eingehalten. Das ultra-robuste Gehäuse verkraftet problemlos die Beanspruchung und Belastungen im Live-Einsatz. Wir sind von unserer Qualität so überzeugt, dass wir bei der KLOTZ DX10 5 Jahre Garantie gewährleisten!
Seite 24
KLOTZ AIS GmbH Johann-Sebastian-Bach-Str. 36 85591 Vaterstetten / Munich info@klotz-ais.com klotz-ais.com the signal masters klotz-ais.com...