Hama BTL-200 Bedienungsanleitung Seite 13

1. Turn your Bluetooth stereo speaker on by press and hold the
button till indication blinks rapidly. At this moment, the product is in the
pairing mode.
2. To activate Bluetooth devices searching from your Bluetooth AV
sources by follow their original instruction. Please choose the device
name and enter the pass key „1234" to establish a pairing connection.
3. The speaker supports two audio connections. Please select HEADSET/
HANDSFREE profile if you like to connect to the mobile phone. Or
A2DP/AVRCP profile for stereo sound effect to your audio sourcing.
4. Since connected, the indication will turn to regular blinking twice every
second.
Note: If the pairing can not be established within 60 seconds, the blue indicator
turns to regular blinking once every 2 second automatically. A re-pair-
ing procedure is needed. Please repeat pairing procedure listed above.
3.3 Audio Streaming via Bluetooth:
1. To play music via a Bluetooth AV Transmitter, please make sure the
Bluetooth Wireless Speaker has been connected with the transmitter,
blue indicator will be blinked rapidly 2 times per second.
Note: The device did not support "remote control" function when connecting
with a Bluetooth AV Transmitter;
2. To play music via a Bluetooth USB Dongle, please complete AV pairing
and then activate intended audio player interface afterward, the music
will be transmitted to the speaker automatically.
Note: The Bluetooth USB Dongle should support AVRCP profile to activate
"remote control" function.
3.4 Cellphone Operation:
1. Check your mobile phone's user guide, find out the paragraphs of
Bluetooth Connectivity and follow the instruction to complete pairing
with the speaker. If your cellphone support only HANDSFREE profile,
please activate connection from the cellphone.
2. Cellphone will always be the top priority, since an incoming/outgoing
has been progressed, it interrupts actively and the on-going music will
be muted. As soon as the call has been hangs up, the music rebound
afterward.
12
,∞
button will act as "mute" function.
,∞