auna Dabstep Anschluss- Und Anwendungshinweise Seite 18

• Switch the device on and press MODE repeatedly to select FM mode.
• Display:
• The symbol in the upper right corner indicates the strength of the received FM signal.
• Below the clock, the currently tuned in station is displayed by name. The lower line is reserved for
additional information received through the FM / RDS signal.
• Press < / >, to tune up/down in steps of 0.05 Hz. Press SCAN for scanning the FM band up to the next
found station.
• Press and hold MENU/INFO on the device, or MENU on the RC, to launch the FM menu. There are two
additional items to the menu as when launched from another mode:
• Scan Setting: Set the sensitivity of the automatic scan, so either all staions will be found and
tuned in, or only stations emitting a stron signal will be tuned in.
• Audio Settings: Toggle MONO / STEREO reception here.
•
Station presets:
• Press the STAR button on the RC, or press and hold MENU/INFO to go to the menu and select
„Preset Store".
• Use < / >, to select the desired preset location and confi rm with OK/SELECT. The station cur-
rently tuned in will be saved to the selected preset.
• There are 10 presets available for each, FM and DAB radio stations.
• Press the STAR button on the RC, or press and hold MENU/INFO to go to the menu and select
„Preset Recall" to choose from previously saved stations.
• The number buttons 1-10 on the RC can be used to directly tune in stations previously saved to
the corresponding presets.
• Switch the device on and press MODE repeatedly to select AUX mode.
• Use a 3.5mm audio cable to connect any external music players such as cassette players, MP3 players,
smartphones and the likes. Turn the output volume of the external device to medium level at least.
18
FM Radio
AUX IN