auna Dabstep Anschluss- Und Anwendungshinweise Seite 16

Alarm
• The device offers two separate alarm times. Please note: Time and date must be set or auto update
must be activated before any alarm can be set.
• Use < / >, to select ALARM 1 / ALARM 2 and confirm (OK/SELECT). The menu will lead you through the
following configuration options:
• On Time: Set the alarm time. The process resembles the setting of the clock. Use </> to adjust,
and OK to continue.
• Duration: Set the alarm duration to 15/30/45/60/90 minutes. The alarm stops after this time, or
when snooze is activated.
• Source: Set the alarm source to DAB, FM or buzz. Activate the LAST LISTENED option to automati-
cally tune in the station last listened. You can also set another station manually, by entering the
frequency.
• Daily: Use < / >, for the alarm to occur daily/once/ on weekends only/on weekdays only.
• Volume: Set the alarm volume.
• Alarm on/off: Select on or off and confirm with OK/SELECT.
• You can enter the alarm settings via the ALARM button on the RC directly. When an alarm is activated,
the corresponding icon is shown in the display (also in standby mode).
• When the alarm goes off, press and hold STANDBY/MODE to deactivate. Press any other button for a
5 minute snooze (the countdown will be shown on the display in this case).
• During snooze time, press any key to increase the snooze time to 5 - 10 - 15 - 30 minutes. Press and hold
STANDBY/MODE to deactivate.
16